PIDS Stud Robotic Welding Machine
Details
Product introduction
The welding system applies IGBT inverter technolog and DSP control technology,and have the capacity carrying 5 welding can be achieved, when the system docks with robots under auto-feeding.
Max.welding current can reach 2000A.
TECHNICAL DATA
A. Circuit topology: Full Wave Bridge Rectification
B. Current control technology: Constant Current PWM or Pulse
C. Power switch: IGBT
D. Power Transformer: Ferrite Dual Transformer
E. Interface monitoring: optoelectronic isolation
F. System Control: DSP+FPGA+CPLD
G. User interface: Touch Screen
H. Language: Chinese/English
I. Network Topology: Real-time half-DUPLEX RS 485, Ethernet, CAN, USB
J. Hardware Anti-interference: isolated power supply
K. Software Anti-interference: Distributed Watchdog,
error return and check, hiccup reset
L. Monitoring system: real-time working condition and fault detection
M.Quality assurance: monitoring and optimization of welding quality
OVERALL TECHNICAL DATA
|
Input voltage |
3×380V, 50/60Hz |
Max.KVA ransge |
In:100~2000A |
|
IPArc initiation current |
20~100A |
TWWelding time |
6~100ms |
|
IPArc initiation time |
10~100ms |
△I |
△I：10A |
|
Input voltage tolerance |
380VAC±10% |
Max.KVA ransge |
120KVA |
|
Welding rate |
n: 30~60 (I=1500A, t=30ms) | ||
|
Welding stud Range |
Φ:3~12mm |
Stud fixing time |
50~2000ms |
|
Feeding time |
50~2000ms |
Lag time |
50~500ms |
|
Stud falling time |
0~50ms |
Supporting capacity |
5 gun interface, pne/more RS232 interfaces, Ethernet, optical fiber and CAN. |
